| Trim the OBM Transfer to final shape and size. Strip opaque Film carrying the Image of the
backing paper. (Hint: Lay Transfer face down on the table and strip paper off the Film.) Pre-press the garment, position Transfer Film face up on the product, cover with Release Paper and place SoftPad on top. |
PRINT   PRESS    STRIP 
|
|
      
|
||
| Note : Remove SoftPad and take the product off the heatpress. Strip Release Paper cool ! Note : Release Paper can be used at least 10 times from both sites. |
| NOTE: This procedure is recommended for volume production
because of the shorter time cycle! Trim the OBM Transfer to final shape and size. Strip opaque Film carrying the Image of the backing paper. (Hint: Lay Transfer face down on the table and strip paper off the Film.) Pre-press the garment, position Transfer Film face up on the product and cover with Release Paper. |
PRINT PRESS   STRIP
|
|
|
|
||
| Note : Take the product off the
heatpress and strip Release Paper cool! Note : Release Paper can be used at least 10 times from both sides! |
Back to OBM 5.6 Product Information