| Trim the OBM Transfer to final shape and size. Peel opaque Film carrying the Image of the
backing paper. (Hint: Lay Transfer face down on the table and strip paper off the Film.) Pre-press the garment, position Transfer Film face up on the product, cover with NRP Release Paper and place SoftPad on top. Note: The NRP has one coated side which has to go face down towards the OBM transfer! |
PRINT   PRESS    PEEL 
|
|
      
|
||
| Note : Remove SoftPad and take the product off the heatpress. Peel NRP cold ! NRP can be used several times! It can be cleaned by pressing it onto plain paper for 5 seconds and peeled cold. |
| Trim the OBM Transfer to final shape and size. Peel opaque Film carrying the Image of the
backing paper. (Hint: Lay Transfer face down on the table and strip paper off the Film.) Pre-press the garment, position Transfer Film face up on the product and cover with NRP Release Paper. Note: The NRP has one coated side which has to go face down towards the OBM transfer! |
PRINT PRESS   PEEL
|
|
|
|
||
| Note : Take the product off the heatpress. Peel NRP cold! NRP can be used several times! It can be cleaned by pressing it onto plain paper for 5 seconds and peeled cold. |
Back to OBM 5.2 Product Information